Beartech Slidemount, Openpilot Slide Quick Mount SET for Comma Device

For detailed documentations, explanations, and installation instructions, please visit: https://docs.innoisle.com/

If you’d like to stay in the loop, please join our discord: http://discord.innoisle.com/

Warning: Slidemount does not support 3rd party comma devices, we don’t guarantee compatibility of Slidemount on any device other than comma C3X, C3 and C2. Thank you for understanding.
Slidemount use two set screws to secure the device mount to your device. Which will create a small dent or scratches. You can check Magmount which does not require set screws. See documentation for details.

Vehicles that require Angle Wedge:
Toyota Highlander (8 degree)
Honda Pilot (8 degree)
Ford F150 (8 degree)
Ford Maverick (8 degree)
Rivian Truck & SUV  (8 degree)
And any windshield that makes your comma device tilt more than 5 degree

Product Description:

We’ve heard your requests, and we’re excited to introduce the Beartech Slidemount!

Why Did We Create the Slidemount?

The Beartech Slidemount was designed in response to community feedback:

1. Users wanted a quick-mount solution that offers physical contact, as some felt uncomfortable using the Magmount.

2. Current Slidemount solutions require a lot of space to install and remove, so we designed ours to require only half the space for a more compact and efficient experience.

Product Highlight: 
– Made from ASA-CF high-temp UV-resistant materials for durability and longevity.
– Slim design with a thickness of 14mm (0.55 inch), making it compact and sleek.
– Built-in mount for the comma device, ensuring seamless integration.
– 1/4 inch screw hole for secure installation:
— On the device side for stable attachment.
— For connecting a camera or suction cup mount on the windshield side.
– Magnets guide, Two-tier sliding rails:
— Magnets guiding for one hand, no aim mounting.
— Two-tier sliding rails with only half the travel distance provide quick mounting and maximum strength.
— Place the mount closer to the top of the windshield.
– The tried and true blade-style connector can deliver high power while providing secure connections.

What is included in Slidemount Set:
Slidemount Set:
1. Slidemount Set Pack:
– Device Side Mount x1
– Windshield Side Mount x1
– Windshield Mount Cover x1
(Prevent short-circuiting after the device is pulled off)
2. Type C pack
– 13cm Right Angle Head Type-C to Right Angle Head Type-C Cable
(Connect the comma device and the Device Side Mount)
– 45cm Right Angle Head Type-C to Stright Type-C Cable
(Connect harness box and the Windshield Side Mount)
3. VHB Tape pack
– Cut to size 3M VHB Tape x2
(Stick the Windshield Side Mount to Car Windshield)
– Wet & Dry wipes x2
(Clean the windshield before apply)
– IPA wipe x2
(Clean the windshield before apply)
– Static film x2
(Stick to the windshield before sticking the VHB tape for easy removal in the future
ONLY stick to glass (no tint on the windshield)
If the temperature in your area is above 40C (or 104F), static film is not recommended)
4. Adhesion Promoter pack
– Adhesion Promoter Wipe x2
(Enhance adhesion for non-glass surfaces, adhesion for dummy mount)
– PE gloves x2
4. Tightening Kit x1
(Adjust set screw)
Allen Key x1
Set Scre x2

What is included in Windshield Slidemount:
1. Windshield Slidemount Pack:
– Windshield Side Mount x1
– Windshield Mount Cover x1
(Prevent short-circuiting after the device is pulled off)
2. Type C pack
– 45cm Right Angle Head Type-C to Stright Type-C Cable
(Connect harness box and the Windshield Side Mount)
3. VHB Tape pack
– Cut to size 3M VHB Tape x2
(Stick the Windshield Side Mount to Car Windshield)
– Wet & Dry wipes x2
(Clean the windshield before apply)
– IPA wipe x2
(Clean the windshield before apply)
– Static film x2
(Stick to the windshield before sticking the VHB tape for easy removal in the future
ONLY stick to glass (no tint on the windshield)
If the temperature in your area is above 40C (or 104F), static film is not recommended)
4. Adhesion Promoter pack
– Adhesion Promoter Wipe x2
(Enhance adhesion for non-glass surfaces, adhesion for dummy mount)
– PE gloves x2

All the electronic components on this device are AEC-Q100 & AEC-Q200 qualified.
All the connecting parts are from original equipment manufacturers.
Assembled in Canada. 3D printed case with ASA automotive grade and UV resistant plastic.

Angle Wedges (Compatible with both Magmount and Slidmount):
1. 8 degree mount
2. 16 degree mount
3. VHB pack

Comma mount adapter (Compatible with both Magmount and Slidmount):
1. Comma mount adapter
2. VHB pack

How to get customer service for the product issue:
Question of setting it up?
– Documentation: https://docs.innoisle.com/
– Discord: https://discord.innoisle.com/
Product defect warranty and help request:
– Email us at `info@beartech.ca` If you purchased from `shop.tlbb.ca` or `shop.beartech.com`.
– Send us a message on Etsy with your order number if you purchased from our Etsy store.